Adhesive Surfaces For Adhesive Tape
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
- The vehicle must be at room temperature before installing, for example self-adhesive covers, door seals, etc. with adhesive tape.
- The adhesive surfaces on the body must be free of dust and grease.
- Clean the adhesive surfaces using Cleaning Solution:D 009 401 04 .
- After installing, press on the covers with adhesive tape using a roller.
- After installing, pull on the components by hand to check for a secure fit.