Wiper Blades, Checking For Damage
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Step 1 - Service Position
-- Switch off the ignition.
-- Press the windshield wiper lever briefly downward.
Step 2 - Testing
-- Lift the windshield wiper and check each wiper blade for breaks, cuts, rough areas and other signs of damage.
-- Repeat the test for the rear window.
-- If damage was detected, replace the respective wiper blade. For the windshield wiper system. Refer to WIPER BLADE, REMOVING AND INSTALLING . For the rear window wiper system. Refer to WIPER BLADE, REMOVING AND INSTALLING .
CAUTION:
- Depending on the model the wiping (one-touch wiping) may be possible by tapping the windshield wiper lever. When working on the wiper system the battery should be disconnected.