LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Wheels, Tires And Wheel Alignment (Wheel And Tire Guide General Information)) >> 44 Wheels, Tires And Wheel Alignment >> Rim Information >> Identification

Rim Information: Identification

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

There are several specifications located on the rim. The following examples shows the rim identification:

Part number 4K0-601-025-AJ, size 8, 5Jx19, ET 40

Replacement parts number: 4K0 601 025 AJ
Size of disc wheel: 8.5 J x 19 8.5 - Rim width in inches J - Shape of rim flange 19 - Rim diameter in inches
Offset (ET): 40 in mm
Indication for hump on bead seat: EH2 Extended Hump. Refer to (1).
(1) Extended Hump, raised round hump on both bead seats. These ensure that when using a tire with emergency mode properties in airless condition, the tire does not slip from the bead seat. Wheels with EH2 are only necessary if tires with emergency mode properties are mounted
NOTE:

Rims with the related part numbers must always be ordered via the Parts Information.

scientia non olet · About LEMON Manuals