LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Wheels, Tires And Wheel Alignment (Wheel And Tire Guide General Information)) >> 44 Wheels, Tires And Wheel Alignment >> Legal And Technical Requirements (Documents) >> Certificate Of Conformity (EG Certificate Of Conformity)

Certificate Of Conformity (EG Certificate Of Conformity)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

The vehicle manufacturer must request an EU type approval for all passenger vehicles (vehicle class M1).

A certificate of conformity is produced based on this type approval.

This document confirms that the vehicle conforms to the EU operating license and is registered in every EU country without the need for individual approval.

The issuing applies to all vehicles that were produced in accordance with the EU operating license.

These vehicles have an EU type plate (black sticker) in the driver door area or in the engine compartment on older vehicles.

The certificate of conformity has the same importance as the operating license, so the original should not be kept in the vehicle.

In the certificate of conformity additional technical data and all permitted wheel/tire combinations are listed.