Vibration, Road Test, Performing Before Balancing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
If a vehicle comes to the workshop with the complaint "vibration", a road test must be performed before balancing the wheels.
CAUTION:
Personal risk and risk for other drivers while test driving.
- Always observe the local applicable law.
- Secure testing equipment.
- That way, information about the type of vibration can be obtained.
- Observe at which speed range the disturbance takes place.
-- Raise the vehicle on the platform immediately after the road test.
-- Mark the component location on the tire.
| Component location of tire | Identification with... |
|---|---|
| Left front tire | LF |
| Right front tire | RF |
| Left rear tire | LR |
| Right rear tire | RR |
-- Remove the wheels from the vehicle.
-- Balance the wheels.