Special Tools
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Engine/Gearbox Jack Adapter - Wheel Hub Support:T10149
- Bearing Installer - Wheel Hub/Bearing Kit:T10205A
- Hydraulic Press - Bushing Assembly Tool Kit :T10230
- Engine/Gearbox Jack - Gearbox Support:T10337
- Socket AF 24 mm:T10361A for 12-point bolt
- or 19 mm inner hex socket, commercially available
- Puller - Differential Bearing:T40032
- Rear Bushing Tool:T40033
- Gearbox Support:T40173
- Torque Wrench 1331 5-50Nm:VAG1331
- Torque Wrench 1332 40-200Nm:VAG1332
- Torque Wrench 80-400Nm:VAG1576
- Hydraulic Press:VAS6178
- Pneumatic/Hydraulic Foot Pump:VAS6179
- Spring Tensioning System:VAS6274
- 130 mm long centering sleeve -5- from the Spring Tensioning System - Audi Set:VAS6274/10
- Engine and Gearbox Jack:VAS6931
- Press Plate:VW401
- Press Plate:VW402
- Press Piece - Rod:VW409
- Press Piece - Multiple Use:VW412
- CV Joint Press Sleeve:VW522
- Press Block :40-204A
- Not Illustrated:
- Bearing Installer - Wheel Hub/Bearing Kit:T10205A
- Locating Pins:T40327
- Assembly Tool:T40328
- Bit XZN 14:T40312
- Supplement Set VAS6274/12:VAS6274/12
- Pneumatic Hydraulic Press:VAS6654
- Puller Set VAS701003:VAS701003