Drivetrain Control Module -J775-, REMOVING AND INSTALLING: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
Activate the control module after installing a new Electronic Damping Control Module -J250- :
-- Connect the Vehicle Diagnostic Tester.
-- Switch the ignition on.
-- Select and start the Diagnostic operating mode.
-- Select the Test plan tab.
-- Select the Select individual test button and select the following tree structure consecutively:
- Drivetrain
- Suspension control
- 0001 - OBD-capable systems
- 0074 - Drivetrain Control Module J775
- 0074 - Drivetrain Control Module functions
- 0074 - Replace control module
-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.