Special Tools
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Shock Absorber Set:T10001
- Tensioning Strap:T10038
- Tripod Joint Tool:T10065
- Engine/Gearbox Jack Adapter - Wheel Hub Support:T10149
- Air Spring Strut Adapter:T10157
- Hydraulic Press - Bushing Assembly Tool Kit :T10230
- Socket AF 24 mm:T10361A for 12-point bolt
- Rear Axle Support:T10552
- Triple Roller Assembly Tool:T40018 for drive axles with triple roller joint AAR 3300 i
- Puller - Differential Bearing:T40032
- Triple Roller Assembly Tool:T40084 for drive axles with triple roller joint AAR 2600 i
- Triple Roller Assembly Tool:T40236
- :T40277
- Strut:T40335
- Torque Wrench 1331 5-50Nm:VAG1331
- Torque Wrench 1332 40-200Nm:VAG1332
- Torque Wrench 1332 Insert - Ring Wrench - 21mm:VAG1332/7
- Torque Wrench 1410:VAG1410
- Torque Wrench 80-400Nm:VAG1576
- Clamping Pliers:VAG1682A with
- Clamping Pliers - Jaws :VAG1682A/1
- :VAG1752
- :VAG1752/6
- Torque Wrench Insert - Open Jaw:VAG1923
- :VAS6199
- Air Suspension Strut Charger:VAS6231
- Hose Clip Pliers:VAS6362
- Engine and Gearbox Jack:VAS6931
- Ball Joint Splitter:VAS251805
- Press Plate:VW401
- Press Plate:VW402
- Press Piece - Rod :VW408A
- Press Piece - Rod:VW409
- Press Piece - Rod :VW411
- Press Piece - Multiple Use:VW412
- Press Piece - 37mm:VW416B
- Press Piece - Multiple Use:VW447H
- Press Piece - 42mm:VW516
- Bearing Installer - Ball Joint/Bushing/Bearing 2:VW459/2
- CV Joint Press Sleeve:VW522
- Slide Hammer Set:VW771
- Engine Support Bridge - Special Hook (2 pc.):10-222A/20
- Press Block :40-204A
- Press Piece - Reverse Gear Syncro: 3296
- Spreader Tool:3424
- Subframe Bushing Tool Kit:3301
- Bearing Installer - Multiple Use:3348
- Not Illustrated:
- Pneumatic Hydraulic Press:VAS6654
- Locating Pins:T40327
- Ball Joint Puller (tool in preparation)
- Torque Wrench 1331 Insert - Ring Wrench - 16mm:VAG1331/12
- Strut:T40335
- Locating Pins for Steering Box:T40334
- Hose Clip Pliers:VAG1921
- Pneumatic Hydraulic Press:VAS6654
- Puller Set VAS701003:VAS701003