Outer CV Joint, Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hitting Copper Or Brass Mandrel Onto Inner Ring Of Constant Velocity Joint

Courtesy of AUDI OF AMERICA, LLC

-- Clamp the drive axle in a vise with protective covers.

-- Open both clamps and remove the CV boot from the outer joint.

-- Drive out the CV joint from the drive axle with a copper or brass mandrel -A- on the inner ring.

-- Remove joint and CV boot.