Threshold "A" In Mm
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If the readout value is greater than the threshold "a" (table value): insufficient damping effect → replace shock absorber.
If the readout value is less than the threshold "a" (table value): sufficient damping effect → shock absorber does not need to be replaced.
| Chassis | Front Axle | Rear Axle | Comment |
|---|---|---|---|
| 1BL | In production | In production | No load tank full tire pressure "partially loaded" |
| 1BQ | In production | In production | |
| 1BA | 43 | 52 | |
| 1BV | 44 | 52 | |
| 2MF | 43 | 52 | |
| 1BK | In production | In production | |
| 1BL | In production | In production | |
| 2MB | In production | In production |