Guidelines For Clean Working Conditions
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
- Thoroughly clean connecting points and their surrounding areas before loosening.
- Place removed parts on a clean surface and cover them so that they do not get dirty. Use foil and paper. Only use lint-free cloths.
- Only install clean parts: remove the replacement parts from their packaging just before installing them.
- Only use greases and sealants that are designated with part numbers.
- Carefully cover or seal opened components if the repair is not performed immediately.
Versions with Air Suspension
- Make sure that no dirt enters the pressure air system.
- Clean the area before removing connecting pieces for the air pipe lines or other components of the pressured air system.
- Seal off any open compressed air lines and connections in the pressure system immediately with plugs or cover them.