Rear Seat Belt Latch, Removing And Installing, Single Seats

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Right Seat Belt Latch, Removing:

-- Remove the right seat cushion. Refer to SEAT CUSHION, REMOVING AND INSTALLING, SINGLE SEATS .

-- If installed, disconnect and free up the seat belt switch connector -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -2- and remove the seat belt latch -3-.

Left Seat Belt Latch, Removing:

Courtesy of AUDI OF AMERICA, LLC

-- Remove the left seat cushion. Refer to SEAT CUSHION, REMOVING AND INSTALLING, SINGLE SEATS .

-- If installed, free up the seat belt switch wire -1- and disconnect the connector.

-- If installed, disconnect and free up the seat belt switch connector -4-.

-- Remove the bolt -3- and then remove with the seat belt latch -2-.

Center Seat Belt Latch, Removing:

Courtesy of AUDI OF AMERICA, LLC

-- Remove the left single seat. Refer to SINGLE SEATS, REMOVING AND INSTALLING .

-- Unclip the seat belt latch cover. Refer to INNER BACKREST HINGE TRIM PANEL, REMOVING AND INSTALLING, SINGLE SEATS .

-- If installed, free up the seat belt switch wire -1- and disconnect the connector.

-- Remove the bolt -2- and remove the seat belt latch -3-.

Installing

Install in reverse order of removal.