LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Passenger Protection, Airbags, Seat Belts) >> 69 Passenger Protection, Airbags, Seat Belts >> Seat Belt Fastening Detection >> Front Passenger Seat Occupant Detection Sensor -G128-, REMOVING AND INSTALLING >> Removing

Front Passenger Seat Occupant Detection Sensor -G128-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the front passenger all the way back to the highest position.

-- Disconnect the connector -2- for the passenger occupant detection sensor.

GWWA69-11090Courtesy of AUDI OF AMERICA, LLC

-- Unclip the mount -1- from the seat pan -arrows- and remove the passenger occupant detection sensor -3-.

scientia non olet · About LEMON Manuals