Overview - Driver Side Airbag
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
- Wiring Harness
- For the Driver Airbag Igniter -N95- and Driver Airbag Release Valve Igniter -N490-
- Allocation. Refer to the Parts Information.
- Removing and Installing. Refer to AIRBAG CONNECTOR, REPLACING .
- Steering Column Electronics Control Module -J527-
- Overview. Refer to OVERVIEW - STEERING COLUMN SWITCH MODULE .
- Steering Wheel
- Overview. Refer to OVERVIEW - STEERING WHEEL .
- Bolt
- Tightening specification. Refer to OVERVIEW - STEERING WHEEL .
- Driver Side Airbag
- with
- Driver Airbag Igniter -N95-
- Driver Airbag Release Valve Igniter -N490-
- Allocation. Refer to the Parts Information.WARNING:
Risk of injury due to involuntary deployment.
- Pay attention to the safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
- Use a T25 TORX screwdriver, approximately 100 mm long
- Removing and Installing. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .
- with