Inner Backrest Hinge Trim Panel, Removing And Installing, Single Seats: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the single seats. Refer to SINGLE SEATS, REMOVING AND INSTALLING .
-- Left single seat: unclip the seat belt latch cover -1-.
-- Unclip the lower cover -1- from the trim panel in direction of -arrow A-.
-- Remove the upper cover from the trim panel in direction of -arrow B-.
-- Remove the expanding clips -1 and 3-.
-- Disengage the trim panel on the seat frame and the backrest hinge in direction of -arrow-.
-- Guide out the trim panel -2- over the seat belt latch and remove.