Outer Rear Seat Backrest Locking Mechanism Trim, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Unlock the rear seat backrest.
-- Make sure the button -2- (indicator) is in the >>up<< position.
-- Push the tabs in direction of -arrows- on both sides of the trim using a :3409 .
-- Remove the trim -1- upward and off the rear seat backrest -3-.
-- Remove the trim -1- in the front section as far as possible upward from the rear seat backrest.
Fig 2: Using A Flat-Head Screwdriver, Pry Clip -Arrow- Located In The Rear Area Of Trim -1- Out Of Retainer
-- Pry the catch -arrow- in the rear section of the trim out of the locking mechanism using a flat-head screwdriver.
-- Remove the trim upward from the rear seat backrest.