LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Seat Frames) >> 72 Seat Frames >> Rear Seats >> Inner Mounting Pin, Removing And Installing >> Removing

Inner Mounting Pin, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the backrest from the center bearing. Refer to CENTER BRACKET, REMOVING AND INSTALLING .

-- Remove the chafe protection -4- and then remove the mounting pin -3- from the backrest frame -1-.

Fig 1: Exploded View Of Inner Mounting Pin
GWWA72-10647Courtesy of AUDI OF AMERICA, LLC

-- Remove the bearing sleeve -2- from the mounting pin.

NOTE:

For clarity, the cushion and cover are not shown.

scientia non olet · About LEMON Manuals