Bench Seat, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Move the front seats all the way forward.

-- Unclip the child seat anchor guides (quantity: four) -1- from the anchors. Refer to LOWER CHILD SEAT ANCHOR GUIDE, REMOVING AND INSTALLING .

-- Grab the bench seat -1- under the molded part -2- using both hands on one side.

Courtesy of AUDI OF AMERICA, LLC

-- Using both hands on one side, forcefully pull the bench seat upward -arrow A- to release the molded part from the front mount -3-.

-- Repeat the procedure on the other side of the bench seat -arrow B-.

-- Push the bench seat toward the rear, and push the rear downward and out of the mounts on the backrest frame.

-- Lift the front of the bench seat slightly and remove it from under the backrest.

-- Equipped on some models: disconnect the connector for seat heating.

-- Remove the bench seat.