Seat Side Trim On Side Sill Side, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Move the front seat into its highest position.

Standard/Sport seat:

-- Equipped on some models: remove the backrest adjustment hand wheel. Refer to BACKREST ADJUSTMENT HAND WHEEL, REMOVING AND INSTALLING .

-- Equipped on some models: remove the seat height adjustment handle. Refer to SEAT HEIGHT ADJUSTMENT HANDLE, REMOVING AND INSTALLING .

-- Remove the expanding rivets -2 and 3-.

-- Disengage the inner front bracket -arrow- on the seat side trim upward.

-- Pull out the seat side trim -1- upward.

-- Equipped on some models: disconnect the connectors by pressing the release.

Courtesy of AUDI OF AMERICA, LLC

1, 2 - For Driver Seat Adjustment Control Head -E470- / Front Passenger Seat Adjustment Control Head -E471-

3 - For Driver Seat Switch Module -E663- /Front Passenger Seat Switch Module -E664-

-- Free up the wiring harness.

-- Remove the seat side trim on side sill side.

Seat Side Trim Bracket on Side Sill Side, Removing

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and the bracket -1-.