Overview - Front Backrest
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
- Fixed Lumbar Support
- No motors
- Equipped on some models: power backrest adjustment without lumbar support
- Removing and Installing. Refer to LUMBAR SUPPORT ADJUSTMENT MOTORS -V125- / -V126- / -V129- / -V130-, REMOVING AND INSTALLING .
- Pneumatic/Electromechanical Lumbar Support
- Electromechanical lumbar support: different manufacturers
- Removing and Installing. Refer to LUMBAR SUPPORT ADJUSTMENT MOTORS -V125- / -V126- / -V129- / -V130-, REMOVING AND INSTALLING .
- Equipment version: lumbar support with air cushion. Refer to OVERVIEW - PNEUMATIC SYSTEM .
- Tension Springs
- For spring mat
- Note the different lengths
- Spring Mat
- Equipped on some models: manual backrest adjustment without lumbar support
- Removing and Installing. Refer to SPRING MAT, REMOVING AND INSTALLING .
- Backrest
- Removing and Installing. Refer to FRONT BACKREST, REMOVING AND INSTALLING .
- Bolt
- 2.5 Nm
- Quantity: 2
- RSE Mount
- For the headrest
- Removing and Installing. Refer to HEADREST GUIDE, REMOVING AND INSTALLING .
- Backrest Cover
- Removing and Installing. Refer to BACKREST COVER, REMOVING AND INSTALLING .
- Make sure it is engaged properly after installing
- Bolt
- 33 Nm
- Quantity: 4
- Self-locking
- Replace after removing.
- Threaded holes for the bolts must be cleaned, for example, with a thread tap
- Tension Springs
- For spring mat
- Note the different lengths
- Rivet
- Rivet