Glove Compartment Handle, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Release the hook for the glove compartment handle -arrow A- through an opening on the side of the glove compartment lid using a TORX screwdriver T7 (approximately 50 mm long) or with the : T40011 .
-- At the same time, use the scraper from the : VAS6845 to press the glove compartment handle -1- off the hook -arrow B- and hold it in that position.
-- Remove the TORX screwdriver from the glove compartment lid and remove the glove compartment handle.