Glove Compartment Handle Lock Cylinder, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Insert the key -3- into the new lock cylinder -2-.
-- Remove the protective cap from the new lock cylinder.
-- Insert the lock cylinder into the glove compartment handle -1- until it engages. Pay attention to the installation position of the pin.
- The pin -arrow- on the lock cylinder points upward.
Further installation is the reverse order of removal.