LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Interior Equipment) >> 68 Interior Equipment >> Storage Compartments And Covers >> Driver Side Instrument Panel Cover, Removing And Installing >> Removing

Driver Side Instrument Panel Cover, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the driver side instrument panel side cover. Refer to INSTRUMENT PANEL SIDE COVER, REMOVING AND INSTALLING .

-- Open the storage compartment cover -1-.

GWWA68-10899Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

-- Disengage the instrument panel cover on the side at the pin -arrow A-.

GWWA68-10900Courtesy of AUDI OF AMERICA, LLC

-- Unclip the instrument panel cover -1- from the instrument panel by hand or using the : T10383/1  in direction of -arrow B-.

-- Disconnect the connector from the light switch.

-- Remove the driver side instrument panel cover.

-- Remove the nuts -arrows- and remove the footwell cover -1- from the threaded pins.

GWWA68-10901Courtesy of AUDI OF AMERICA, LLC

-- Disengage the data link connector on the footwell cover.

-- Equipped on some models: disconnect the connectors for the footwell lamp, parking aid warning buzzer and the emergency call speaker.

-- Remove the footwell cover on the driver side toward the rear.