Electromechanical Parking Brake Control Module -J540-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Fold up the right rear side trim in the luggage compartment.
A Towing Recognition Control Module -- may be installed depending on the model. The trailer mode control module and the bracket for the module must be removed before removing the electronic parking brake control module.
-- Remove the Towing Recognition Control Module --. Refer to OVERVIEW - CONTROLS IN CENTER CONSOLE .
-- Remove the nuts.
-- Slide the locking mechanism for the connection -2- forward.
-- Remove the Electromechanical Parking Brake Control Module - J540- -item 1- with the connection.
-- Remove the connector from the control module.
-- Remove the control module from the vehicle.