Brake Caliper Balance Weight

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Depending on the model, there is one balance weight installed in each front brake caliper.

Fig 1: Brake Caliper Balance Weight Components Location

Courtesy of AUDI OF AMERICA, LLC

Bolt
- Replace after removing.
- 10 Nm
Balance Weight
- Installed once on each brake caliper.
  Removing
  
  -- If equipped, remove the protective cap.
  
  -- Remove the screw -1-.
  
  -- Remove the balance weight from the brake caliper.
  
  Installing
  
  -- Clean the brake caliper around the balance weight.
  
  -- Insert the balance weights in the brake caliper.
  
  -- Tighten the new bolt.
  
  -- If equipped, insert the protective cap.
Brake Caliper