Anti-Friction Plate Installation Position
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
- Insert all four anti-friction plates -A- into the brake pad contact surfaces as shown.
- Anti-friction plate installation position: the small narrow tab faces the brake caliper.
- Make sure the installation position is correct before installing the brake pads.
Brake Pad Installation Position, Steel Brakes 1LC/1LE/1LF
- Inner brake pad with groove -arrow- for brake pad wear indicator sensor
- Outer Brake Pad
-- Clip the brake pads with the springs into the brake caliper pistons.
Spring Bracket, Installing
-- After inserting the brake pads -2-, slide the spring bracket -1- onto the brake pads through the eyes and let it engage into the mount.
- The spring bracket must engage audibly and noticeably in the mount in the brake caliper.