Brake Pads, Removing And Installing, Brakes 1LL, 1ZA, 1ZC, 1ZK, 1LI, 1ZD: Notes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Clean bolts before reusing.
Replacing the damaged bolts. Refer to the Parts Information.
Always replace the self-locking bolts. Refer to the Parts Information.
NOTE:
Coat the brake pad plates with grease. Refer to the Parts Information.
Coat the guide pin with lithium grease. Refer to the Parts Information.
Do not coat the rubber components and seals with grease or paste.
If old brake pads are being replaced with new ones, then it is necessary to check the brake rotor for wear. Pay attention to the brake rotor wear limit while doing this.
Special tools and workshop equipment required
- Piston Resetting Tool:T10145
- Lithium Grease:G 052 150 A2 . Refer to Parts Information.