Brake Pedal, Attaching To Brake Booster
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Connecting
NOTE:
If possible, leave the brake pedal stop -17- installed; it could break the mount for the brake lamp switch -10- if the brake pedal is released too quickly.
-- Hold the pushrod ball head in front of the mount and push the brake pedal toward the brake booster, so that the ball head engages audibly.
-- Install the Brake Lamp Switch - F-.