Brake Pedal Position Sensor -G100-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Footwell Vents

Courtesy of AUDI OF AMERICA, LLC

-- Remove the footwell vent. Refer to the appropriate service information .

-- Disconnect the connector -1- to the Brake Pedal Position Sensor - G100- -2-.

Fig 2: Disconnect Connector From Brake Pedal Position Sensor

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and the Brake Pedal Position Sensor - G100- -2-.