Brake Pedal Position Sensor -G100-, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specifications. Refer to OVERVIEW - BRAKE PEDAL .

-- Insert the Brake Pedal Position Sensor -G100- -2- and tighten the bolts -arrows- to 8 Nm.

-- Connect the connector -1-.

-- Install the footwell vent. Refer to the appropriate service information .