Rear Brakes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Refer to the appropriate service information.
| Production-relevant number (PR number) | 1KD | 1KF, 1KJ, 1KK and 2EJ | |
|---|---|---|---|
| Brake Rotor | Diameter in mm | 300 | 330 |
| Internally vented brake rotor thickness | mm | 12 | 22 |
| Brake rotor wear limit | mm | 10 | 20 |
NOTE:
Maximum lateral run-out of steel brake rotor = 0.06 mm
Measurement in installed brake rotor
Use Dial Indicator Bracket - VAS6079/1; Dial Indicator - 0-10mm - VAS6079.
Clean dirt and rust off the brake rotor.
Measure 10 mm away from the outer edge of the brake rotor.