Front Brakes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Refer to the appropriate service information.
| Production-relevant number (PR number) | 1LC | 1LE and 1LF | 1LG and 1LH | |
|---|---|---|---|---|
| Internally vented brake rotor | Diameter in mm | 318 | 338 | 338 |
| Brake rotor, new thickness | mm | 30 | 30 | 30 |
| Brake rotor wear limit | mm | 28 | 28 | 28 |
NOTE:
Maximum lateral run-out of steel brake rotor = 0.06 mm
Measurement in installed brake rotor
Use Dial Indicator Bracket - VAS6079/1; Dial Indicator - 0-10mm - VAS6079.
Clean dirt and rust off the brake rotor.
Measure 10 mm away from the outer edge of the brake rotor.
Front Brakes
| Production-relevant number (PR number) | 1ZA and 1ZK | 1LL and 1ZC | 1LI, 1ZD | |
|---|---|---|---|---|
| Internally vented brake rotor | Diameter in mm | 350 | 350 | 375 |
| Brake rotor, new thickness | mm | 34 | 34 | 36 |
| Brake rotor wear limit | mm | 32 | 32 | 34 |
NOTE:
Maximum lateral run-out of steel brake rotor = 0.06 mm
Measurement in installed brake rotor
Use Dial Indicator Bracket - VAS6079/1; Dial Indicator - 0-10mm - VAS6079.
Clean dirt and rust off the brake rotor.
Measure 10 mm away from the outer edge of the brake rotor.