Parking Brake, Checking
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Test Sequence
-- Drive the rear wheels of the vehicle onto the test rollers and do not switch off the ignition.
NOTE:
Do not switch off the ignition.
-- As soon as the rollers reach a speed above 3 km/h, "T U V mode" is activated.
-- The yellow electro-mechanical parking brake symbol with a line through it appears in the instrument cluster. Refer to the Owner's Manual, Instruments and Indicator Lamps.
The electromechanical parking brake functions now as follows:
- The brake does not close at once, but rather closes a bit each time the Electromechanical Parking Brake Button -E538- is pressed. The brake is completely closed in three stages.
- Pressing the Electromechanical Parking Brake Button -E538- releases the brakes again.
Requirement for "T U V mode" :
- Ignition is on
- Front wheels, speed = 0 km/ h
- Rear wheels, speed min. = 3, max. 9 km/h (6 mph).
WARNING:
A brake test stand with a regulated wheel set must be used on AWD vehicles.