LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Hydraulic Components (Brake System)) >> 47 Hydraulic Components >> Vacuum System >> Vacuum System, Checking >> Brake Booster Tester, Connecting

Brake Booster Tester, Connecting

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the vacuum hose from the brake booster.

-- Pressing the brake pedal a few times beforehand makes it easier to remove the vacuum hose.

-- Connect the : VAS6721  as shown in the following illustrations.

Fig 1: Connecting Brake Booster VAS6721
GWWN47-10223Courtesy of AUDI OF AMERICA, LLC
Item Component Explanation
A Shut-Off Valve In the direction toward the vacuum hose, the check valve and vacuum pump (if equipped)
B Shut-Off Valve
  • Opening the : VAS6721  makes it easier to remove
  • Open to simulate a malfunction source
  • Connect the : VAS6213  .
C Shut-Off Valve In the direction toward the brake booster

-- Connect the hose -A- from the : VAS6721  to the vacuum hose and push the adapter -C- into the brake booster.

Fig 2: Connect The - VAS 6721- Hose -A- Too The Vacuum Hose And Push The Adapter -C- Into The Brake Booster.
GWWN47-10209Courtesy of AUDI OF AMERICA, LLC