LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Hydraulic Components (Brake System)) >> 47 Hydraulic Components >> Vacuum System >> Electric Vacuum Pump, Removing And Installing >> Removing

Electric Vacuum Pump, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the connector -1- and remove it from the clip on the Brake System Vacuum Pump -V192- bracket.

Fig 1: Identifying Brake System Vacuum Pump -V192-
GWWA47-10074Courtesy of AUDI OF AMERICA, LLC

-- Release the vacuum hose -2- and remove it from the Brake System Vacuum Pump -V192-.

CAUTION:

Do not damage the vacuum hose. Replace the vacuum hose if damaged.

-- Remove the nuts -arrows- and then remove the Brake System Vacuum Pump -V192- -1- upward.

Fig 2: Removing Nuts Then Removing Brake System Vacuum Pump
GWWA47-10075Courtesy of AUDI OF AMERICA, LLC