Protective Cap And Guide Pins, Replacing: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Lubricate the guide pin before inserting.
-- Slide the protective cap over the groove on the guide pin.
-- Slide the guide pin -8- with the protective cap -9- through the brake carrier.
-- Press the protective cap over the groove on the brake carrier.
-- Install the brake caliper.