Brake System Pressure Reservoir -VX70-, PRE-BLEEDING
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Bleeder bottle from the Brake Charger/Bleeder Unit: VAS5234
- Plugs from the Assembly Part Set: 5Q0 698 311
- M10 plugs
- M12 Plugs
Procedure
-- Attach the bleeder bottle -2- to the Brake System Pressure Reservoir -VX70- -item 1- with a suitable bleed hose.
-- Open the bleed screw -3-.
-- Fill with brake fluid until it comes out of the threaded hole -arrow- free of bubbles.
-- Close the bleeder screw.
-- Seal the threaded hole with a plug from the Assembly Part Set: 5Q0 698 311 .
-- Install the Brake System Pressure Reservoir -VX70-. Refer to Brake System Pressure Reservoir -VX70-, REMOVING AND INSTALLING .