Brake Booster Ball Head, Adjusting
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Depending on the version, the ball head may already be set to the right dimension.
Ball head tightening specification 30 Nm ± 4 Nm
- Dimension -a- = 166.9 mm ± 0.5 mm
- When measuring, the ball head must be aligned at a right angle to the brake booster surface.
- Measure to end of ball head without the seal.