MISFUELING Guard, Removing And Installing: Installing

Fig 1: Fitting Fuel Protection In Groove In Fuel Filler Tube

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal and note the following:

-- Insert the misfueling guard into the fuel filler neck.

• The tab on the misfueling guard must engage into the groove on the fuel filler neck -arrows-.

-- Turn the locking ring -arrows- 25° clockwise and install it using the locking ring pliers.

Fig 2: Identifying Installation Of Locking Ring With Locking Ring Pliers

Courtesy of AUDI OF AMERICA, LLC

-- If installed correctly, the markings on the locking ring and on the fuel filler neck will align -arrows-.

Fig 3: Aligning Markings On Locking Ring And On Fuel Filler Tube

Courtesy of AUDI OF AMERICA, LLC

Function Test:

• The locking latch for the misfueling guard cannot open without :T40256  .
• The :T40256  must be inserted all the way in the fuel filler neck.