Accelerator Pedal Module -GX2-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bolt -1-.

Fig 1: Accelerator Pedal Position Sensor -G79- /Accelerator Pedal Position Sensor 2 -G185-

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the bottom of the accelerator pedal module -3- from the pedal bracket and remove.

-- Press the release and disconnect the connector -2-.