Reducing Agent, Automatic Recirculation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

After switching off the ignition, the reducing agent flows back into the reducing agent tank via the metering line to the Reducing Agent Injector -N474-.
Before working in this area, wait at least 10 minutes after switching off the ignition so that the recirculation process can be completed.
Also wait 10 minutes after switching off the ignition before disconnecting the battery so that the recirculation process can complete. Refer to BATTERY, DISCONNECTING AND CONNECTING .

CAUTION:

Risk of damage due to reducing agent

If any reducing agent contacts the trim or body components, the reducing agent can crystallize after a period of time and damage the surface.

-- Make sure the reducing agent does not contact any trim or vehicle body components.

-- If any contact occurs on surfaces, remove the reducing agent immediately using water and a towel.