Trailer Hitch Socket, Removing And Installing - Version 3: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Trailer Hitch Wiring Socket Components

Courtesy of AUDI OF AMERICA, LLC

-- Fold out the trailer hitch. Refer to the vehicle Owner's Manual.

-- Switch off the ignition and remove the ignition key.

-- Remove the bolts -arrows-.

-- Remove the socket from the retaining plate.

-- Remove the rubber cover from the socket.

-- Release the retaining clips in direction of -arrows- and press multiple connector -1- out of socket -2-.

Fig 2: Releasing Retaining Clips -Arrows- To Press Multiple Connector -1- Out Of Socket -1-

Courtesy of AUDI OF AMERICA, LLC

-- Release the retaining clips in direction of -arrows- and remove retainer -2- from multiple connector -3-.

Fig 3: Releasing Retaining Clips -Arrows- To Remove Retainer -2- From Multiple Connector -3-

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Carefully remove the retainer so that contacts -2- of the multiple connector are not disconnected from the wiring harness.