Carbon Brushes, VALEO Generator From 2001, Checking

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Procedure

Fig 1: Carbon Brush Checking, Valeo Generator, From 2001

Courtesy of AUDI OF AMERICA, LLC

-- Remove voltage regulator. Refer to VOLTAGE REGULATOR, VALEO GENERATOR FROM 2001, REMOVING AND INSTALLING .

-- Check the length -a- of the carbon brushes.

Wear limit: -a- = 5 mm.

-- Install the voltage regulator. Refer to VOLTAGE REGULATOR, VALEO GENERATOR FROM 2001, REMOVING AND INSTALLING .