Carbon Brushes, Checking, HITACHI Generator
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Procedure
-- Remove the voltage regulator. Refer to VOLTAGE REGULATOR, REMOVING AND INSTALLING - HITACHI GENERATOR .
-- Check the length -a- of the carbon brushes -1-.
- Wear limit: -a- = 6.5 mm.
-- Install the voltage regulator. Refer to VOLTAGE REGULATOR, REMOVING AND INSTALLING - HITACHI GENERATOR .