Battery, Disconnecting And Connecting, 0K4 And VH2: Notes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
The 12 V system is supported by the 48 V system via the Voltage Converter, 48 V/12 V -A7-. So the only way for the 12V vehicle electrical system to be de-energized is to de-energize the 48V system beforehand.
- For subsequent work on the SCR system, wait until all of the reducing agent has returned after switching off the ignition.
Disconnecting
-- De-energize the 48V system. Refer to 48V SYSTEM, DE-ENERGIZING .
-- Switch off the ignition.
-- Remove the luggage compartment floor.
-- Open the cover -3- over the battery negative terminal.
-- Loosen the nut -1- several turns and remove the battery ground cable clamp -2- from the battery terminal.