Overview - Adaptive Cruise Control (Acc)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
- Retaining Plate
- Removing and Installing. Refer to RETAINING PLATE FOR DISTANCE REGULATION CONTROL MODULES -J428- / -J850-, REMOVING AND INSTALLING .
- Bolt
- 2.5 Nm
- Quantity: 3
- Clip
- Cannot be removed without being damaged
- Closed version
- Note the installation position
- Clip
- Open version
- Cannot be removed without being damaged
- Stud Bolt
- Note the adjustment dimension. Refer to Measure the dimension .
- Quantity: 3
- Clip
- Must be replaced when the stud bolt is removed
- Replacing. Refer to CLIP ON Distance Regulation Control Module -J428-, REPLACING .
- Quantity: 3
- Distance Regulation Control Module
- Right: Distance Regulation Control Module -J428-
- Left: Distance Regulation Control Module 2 -J850-
- Removing and Installing. Refer to DISTANCE REGULATION CONTROL MODULES -J428- / -J850-, REMOVING AND INSTALLING .
- Adjust the adaptive cruise control. Refer to ADAPTIVE CRUISE CONTROL (ACC), ADJUSTING .
- Operating Lever for Adaptive Cruise Control
- Shared component with the steering column switch module. Cannot be replaced separately
- Removing and Installing. Refer to STEERING COLUMN SWITCH MODULE, REMOVING AND INSTALLING .
- Instrument Cluster
- With Instrument Cluster Control Module -J285-
- Front Bumper
- Clip
- Open version
- Cannot be removed without being damaged