Plenum Chamber Cover, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the windshield wiper arms. Refer to WINDSHIELD WIPER ARMS, REMOVING AND INSTALLING .
-- Remove the seal -1-.
-- Coat the transition between the windshield -2- and the plenum chamber cover -5- with some soapy water. Starting at the window edge, carefully remove the plenum chamber cover vertically upward from the retainer on the windshield.
-- Remove the plenum chamber cover -5- by carefully removing the plenum chamber cover tab -4- in the direction of the -arrow- from the windshield mount -3-.