LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Bumpers (Fy & 87)) >> 63 Bumpers >> Rear Bumper >> Impact Guard, Removing And Installing >> Installing

Impact Guard, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Push the rear impact guard into the bumper cover until it clicks into place.

scientia non olet · About LEMON Manuals