Lock Carrier Cover, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the hook release lever. Refer to HOOK RELEASE LEVER, REMOVING AND INSTALLING .
-- Release the lock carrier cover catches -5- on the radiator grille -4- and on the bumper cover -3- using the : T40233 -arrow-.
-- Remove the lock carrier cover -2- from the groove in the lock carrier -1-.
-- Remove the lock carrier cover.
TIP:
Install the hook operating lever again (refer to HOOK RELEASE LEVER, REMOVING AND INSTALLING ) if in the future procedures the hood is closed.