LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Cooling System [CWGD]) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING >> Removing

Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2022 Audi SQ5, 2021 Audi SQ5, 2020 Audi SQ5, 2019 Audi SQ5, and 2018 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the upper air duct pipe. Refer to AIR DUCT PIPE, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and remove the left front coolant pipe from the coolant pump.

GWWA19-12531Courtesy of AUDI OF AMERICA, LLC

All additional procedures. Refer to COOLANT PUMP, REMOVING AND INSTALLING .